Concrete, pavers, travertine and pool decks — cleaned with a rotating surface cleaner, so you get an even finish instead of the zebra stripes a pressure wand leaves behind. Rust and oil treated separately, because pressure alone won't touch them.
✓ Surface cleaner, no wand stripes · ✓ Rust & oil treatment · ✓ Pool-deck safe pressure
Most of this site argues for going gentler — roofs and stucco get soft washed because force damages them. Driveways are the opposite. Concrete can take real pressure, and holding back on it is why so many driveways come out looking only half-cleaned.
What matters is the tool. A pressure wand cleans in a narrow arc, so overlapping passes leave visible zebra striping across the slab — you've almost certainly seen it on a neighbor's driveway. A rotating surface cleaner covers a fixed width at consistent pressure and a consistent distance, edge to edge. Same machine, completely different result. We use a surface cleaner on every flat surface, every time.
But pressure doesn't solve everything, and this is where most companies overpromise. Rust won't come out with pressure — those orange streaks are dissolved iron from irrigation water that has penetrated into the concrete, not sat on top of it. It needs a dedicated rust remover, applied and given time to work. Same with oil: fresh drips lift with degreaser and heat, but oil that's been soaking into porous concrete for years may leave shadowing no matter what we do.
And pool decks need pressure to come back down. Textured coatings like Kool Deck are soft enough that high pressure strips the texture off and leaves permanent bald patches. Travertine and some pavers are the same. We identify the surface before we start rather than running one setting across the whole property.
A driveway, a travertine patio and a Kool Deck pool surround need three different pressures. Running one setting across all three is how damage happens.
Concrete, pavers and brick cleaned with a rotating surface cleaner for an even, stripe-free finish. Includes the apron, walkways and entry path — the parts that frame your house from the street.
Get a driveway quote →
Travertine, pavers and textured pool deck coatings all need less pressure than a driveway — Kool Deck in particular will lose its texture permanently under a surface cleaner run too hot. We match pressure to the material.
Get a driveway quote →
Irrigation rust and oil staining don't respond to pressure — they need the right product and dwell time. We treat them as a separate line item because they're a separate job, and we'll tell you up front what will and won't come out.
Get a driveway quote →Got orange rust streaks or an old oil stain? Call (954) 692-3107 — send a photo and we'll tell you honestly how much of it will actually come out.
Everything above the driveway drains onto it. Roof runoff, house wash runoff, window runoff — all of it lands on the concrete. Clean the driveway first and you'll be looking at dirty concrete by lunchtime. The right sequence is roof, house, windows, driveway — one crew, one setup, at a better price than four separate visits.
The most common pairing we run. Wash the house, then clean the concrete it just rinsed dirt onto. Booking these apart means two setup fees and a driveway you clean twice.
See house washing → Right orderPavers have to be cleaned before they can be sealed — the sealer locks in whatever's underneath it. If you're considering sealing, cleaning is step one, so doing both in one visit is the only sequence that makes sense.
See paver sealing → Full exteriorOne crew, one visit, one invoice, in the right sequence — roof, house, gutters, windows, driveway last. This is what most of our repeat customers book once a year and forget about.
See all services →Not sure what your home needs? Call (954) 692-3107 — we'll tell you what's worth doing now and what can wait.
Driveways, patios, walkways and pool decks throughout our service area. Tap your city for local details.
We identify the surface first — concrete, pavers, travertine or a textured coating — because each takes a different pressure. Rust, oil and organic staining get pre-treated with the right product and given time to work before any machine touches them.
A rotating surface cleaner runs the flat areas at consistent pressure and distance, which is what gives an even finish instead of wand stripes. Edges, borders and tight corners are detailed by hand afterward, since a surface cleaner can't reach them.
Full rinse, landscaping and beds rinsed down, then we walk it with you before packing up. If a rust or oil stain didn't fully release, you'll hear it from us rather than discover it later. Licensed and insured, COI for any HOA.
Got a stain you're not sure about? Text us a photo — we'll tell you honestly how much of it will come out before you book anything.
Call (954) 692-3107Every one of these was photographed on site by our crew. No stock photos, no staging — just the concrete before we touched it and the same concrete when we left.
DRIVEWAY · Before & after
PATIO & POOL DECK · Before & after
RUST REMOVAL · Before & after
DRIVEWAY · Meadow Run, Parkland
More completed work on our recent projects page.
Tell us your address and what you need cleaned. We'll get back to you fast — usually within the hour during business hours.
Takes about 30 seconds. No site visit needed for most jobs.